TIME2110 Ultrasonic Thickness Gauge-Shanghai Shangcai Testing Machine Co., Ltd.

Welcome to the official website of Shanghai Shangcai Testing Machine Co., Ltd.!

Metallographic Sample Preparation Equipment

Chinese

Home page

Product Center

TIME2110 Ultrasonic Thickness Gauge

1. Performance Metrics
Display mode: Four-digit LCD display
Operating temperature range: 0 °C～ 40 °C
Power supply: two batteries 7 No. dry battery
Power consumption: Operating current < 20mA (3V)
Weight: approximately 140g

2. Main Features
● Features both metric and imperial display modes
● Automatic zero-point calibration, enabling correction of systematic errors.
● Linear automatic compensation: Throughout the entire measurement range, computer software is used to correct probe nonlinear errors, thereby enhancing accuracy.
● The up and down adjustment keys allow for quick fine-tuning of sound velocity and thickness, and enable rapid access to the thickness storage units.
● Coupling status indication: A coupling indicator is provided; by observing its stable state, one can determine whether the coupling is functioning properly.
● It can store ten thickness values, and the data is retained even after power-off, providing convenience for high-altitude and field operations.
● Sound Velocity Measurement Function: Directly measures the sound velocity based on the sample thickness, eliminating the need for table lookups or manual conversions.
● Can store the sound velocities of five different materials.
● Low-voltage warning.
● Auto Shut-Off: The timed auto shut-off feature helps you cut the power.
● Fully sealed operation with a membrane for all connections ---- Oil-resistant, extending service life.

		TIME2110
Display resolution /(mm)		0.1
Adjustable speed of sound		√
Sound speed adjustment range /(m/s)		1000 ~ 9999
Indication error (steel) /(mm)		± (0.1+1%H)
Repeatability /(mm)		0.1
Indication stability /(mm)		0.1
Indication error of curved-surface measurement (steel) /(mm)		F 20mm × 3.0mm,(5P F 10 Probe, 5P F 10/900 Probe ) , F 15mm × 2.0mm(7P F 6 Probe ), The indication error shall not exceed ± 0.1。
Thickness indication error with varying sound velocity (steel) /(mm)		Not greater than ± (0.2+nH/100) 。
Sound Speed Measurement /(m/s)		H ≤ 20mm At that time, the measurement error does not exceed ± 1mm/H × 100%； H > 20mm At that time, the measurement error does not exceed ± 5%。
Voltage Variation Stability (Steel) /(mm)		0.1
Undervoltage indication		After the thickness gauge is turned on, when the battery voltage is 2.2V ± 0.2 V At that time, the screen displayed “ BATT ”。
5P F 10 5P F 10/90 °	Measurement range (steel) /(mm)	1.2 ~ 225.0
7P F 6	Measurement range (steel) /(mm)	0.75 ~ 60.0
SZ2.5P	Measurement range (steel) /(mm)	3.0 ~ 300.0

Fully Automatic Unattended Hardness Testing System

TIME2130 Ultrasonic Thickness Gauge

Fully Automatic Unattended Hardness Testing System

TIME2130 Ultrasonic Thickness Gauge